Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

SHYLIYU Bomba para pozo Sumergible Bomba de Pozo profundo Acero Inoxidable 0.55KW / 0.75HP Bomba de Perforación 3 Pulgada de Calibre Profundidad Hasta 89m Bomba Submergible

Envío gratis en pedidos superiores a 25.99€

258.99€

99 .00 99.00€

En stock

1.Tamaño:0.25kw 0.33hp 1inch


Acerca de este producto

  • ★ Material: el cuerpo de la bomba es de acero inoxidable, cabeza de la bomba de latón , plástico del impulsor. POM
  • ★ Aplicación: Ideal para el pueblo, la familia, la granja, el suministro de agua del jardín de camping, el riego
  • ★ Perfecto para aplicaciones domésticas y de servicios públicos de transferir agua de un lugar a otro
  • ★ eficiente servicio de venta y postventa en línea, calidad garantizada
  • ★ tamaño del artículo: 141 *11.5*19



Descripción del producto

Introducción de la marca SHYLIYU

SHYLIYU se centra en la investigación y el desarrollo de diferentes bombas de agua, nuestra empresa se dedica principalmente a maquinaria y equipo, bombas de agua, material y productos metálicos, venta de productos electrónicos, importación y exportación de bienes.

3SDM1.8/10-0.33HPV2

Modelo: 3SDM1.8 / 10-0.25 Voltaje: 220-240V / 50Hz Potencia: 0.25km 0.33hp Máx. Cabeza: 39m / 128ft Max. caudal: 3,3 m³ / h, 12GPM Velocidad: 2850r / min Salida: 1 pulgada Cable: 10m con caja de control

SHYLIYU

Bobina de cobre puro

Bobina de cobre puro con protección contra sobrecalentamiento incorporada para evitar daños al motor

SHYLIYU

Rotor de alta precisión

Bobina de cobre puro con protección contra sobrecalentamiento incorporada para evitar daños al motor

SHYLIYU

Impulsor de plástico alto

Impulsor de plástico alto, que proporciona flujo de agua.

SHYLIYU

Filtro de acero inoxidable

Pantalla de filtro de acero inoxidable, filtra las impurezas en el agua, proporciona una fuente de agua de alta calidad

SHYLIYU

  • Material de la bomba de agua
  • El puerto de la bomba está hecho de latón superior
  • El cuerpo de la bomba está hecho de acero inoxidable.
  • Robusto y resistente a la corrosión, larga vida útil
  • Esta bomba de circulación tiene un diseño novedoso, materiales de alta calidad y una amplia gama de usos.
  • Adecuado para sistemas de circulación de agua domésticos, riego agrícola, agua de la ciudad, agua industrial, etc.

B. C.
Reseñado en Alemania el 20 de marzo de 2025
Ich habe eine NEUE Pumpe bestellt und eine Gebrauchte Pumpe erhalten.
SILVIU TURCU
Reseñado en Italia el 10 de diciembre de 2024
Questa pompa doveva consumare 250 Wh invece consuma 660Wh .. non sono contento per niente...
Kunde
Reseñado en Alemania el 20 de septiembre de 2024
Die Pumpe ist sehr gut allerdings habe ich die Länge vom Kabel zu bemängeln, das Kabel ist ca. 10m lang und das ist natürlich etwas zu kurz für meisten Brunnen.
Aldo
Reseñado en Francia el 8 de octubre de 2023
No se ha podido cargar el contenido multimedia.
Cliente
Reseñado en España el 8 de septiembre de 2023
TODO PERFECTO
Ángel
Reseñado en España el 6 de marzo de 2022
Hola, necesito una bomba de agua sumergible para pozo de sondeo de 64 metros con una altura manométrica de 70 metros, la bomba tiene que poder sumergirse hasta 64 metros y tiene que elevar el agua a 70 metros. Me podéis ayudar porfavor, gracias, Ángel.
Customer
Reseñado en el Reino Unido el 9 de mayo de 2021
Had to replace my old submersible pump. Local dealer was 5 times the price compared to this one which did not sit well with me. My old one was put in 1990 so I think we got our monies worth out of it.Pump arrived on time. Read the manual (twice) and assembled the pump inside before taking it outside to be fitted.I was replacing an old pump so it was very straight forward for me.Few things to note before and during installation.1. Take pictures of the old wiring connection box before changing over to the new one. To reference back to when connecting the new pump and power feed (that is if you are replacing a pump).2. Get some wide rubber tape (like insulation tape) to tape the power cable to the pipe from the pump about a meter apart up the pipe and made sure it was stuck well and would not come off (you do not want that in you well if it comes off).3. Check the the pipe connection will fit your new pump (if replacing it for an old one).4. Make sure that you install a one way value to stop the water going back to the pump. Once the pump stops working it will not let the water that you have pump into the pipe go back into the pump. If one is not insulated it will reck the pump and motor by forcing everything to go backwards plus putting old water back onto the well.5. Service the pump once a year by taking it out an clearing the intake filter.6. Before putting the pump into the well (old or new well) wash the outside of the pump. This is to stop any contamination of oil, metal, etc.. from the factory where the pump was made at from entering the well and your system.7. Run the pump for a good 10 to 15 minutes once in place into a drain so to clear it of factory contaminates and more importantly to make sure that the pump is working fine.This was not my first time of replacing this kind of pump and it took me the whole morning to do from assembly of the pump to system flushed, testing and all packed up.Over all, I was very happy with the pump and would recommend it. Big thumbs up from me.Only time will tell how long it will hold up as I am using it to irrigate my garden so it should last a long time.
Santos
Reseñado en España el 25 de noviembre de 2020
la tengo puesta en un pozo de 22 metos de profundidad y sube agua con muy buena presion a una altura de dos o tres metro mas
Productos recomendados

167.76€

74 .99 74.99€

4.9
Elegir