Manu_pamplona
Reseñado en España el 17 de agosto de 2024
Queda bastante bien estos adaptadores.
BownCrusha
Reseñado en Alemania el 8 de agosto de 2023
Ich habe mir diesen Winkel bestellt, da die Stromkabel meiner Grafikkarte nach vorne zum Glas gingen und es nicht "aufgeräumt" aussah. Mit den Winkel sieht es schon deutlich besser aus und kann sie daher ruhigen Gewissens Empfehlen. Im Lieferumfang sind insgesamt 4 Adapter dabei (2x 6 Pin und 2x 8 Pin)
Renzo
Reseñado en Italia el 31 de octubre de 2023
Sono indispensabili se come me avete un case piccolo (ho una scheda madre MATX) e una scheda video abbastanza voluminosa, nel mio caso una 6700XT. Senza questi connettori a 180 gradi avevo i cavi dell'alimentazione schiacciati contro la parete del case. Unica nota negativa il prezzo.
Alfredo
Reseñado en España el 8 de enero de 2023
Añadí un toque de estética con estos conectores y al tener la tarjeta gráfica en vertical no se ven los cables por ningún lado están genial
Kourosh Vivan
Reseñado en Francia el 28 de noviembre de 2022
RAS ok avec gigabyte gtx1060 et xfx rx6600
César SP
Reseñado en España el 29 de junio de 2021
O artigo ficou perfeito e ao vir as 2 possibilidades não tem como não servir, muito boa solução.
Frank B.
Reseñado en Canadá el 25 de junio de 2021
I upgraded my video card, and it required an additional 6 pin power connection, which was on TOP of the card. This caused the wiring harness from the power supply to stick up higher than the top of the case. I was unable to put the lid back on my media PC in the living room, making it pretty ugly looking. This solved the issue perfectly. It is not only totally flat, but also has a foam rubber strip on the back so that the power adapter does not chafe on the bottom of the case lid. Love it! And was not available at my local computer store.
Pedro G
Reseñado en España el 22 de febrero de 2021
No se ha podido cargar el contenido multimedia.
Customer
Reseñado en el Reino Unido el 21 de febrero de 2021
The problem I had with these is that the 3 pin is simply far too short to clear the depth of a gtx 1080. The 4 pin only just clear but could do with being longer. If both the 3 pin and 4 pin could be turned around so it's going across the back(top) of card it would obviously work, but only the 3 pin was able to be in that position, not the 4 pin, but I didn't want that config as it would show more wires. I can't say if these work or not as the 3 pin doesn't have the length to clear the depth. Another inch on both of these would probably do the trick.