No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Características
No se requiere giro para la medición. Adecuado para fresadoras convencionales y máquinas de mecanizado integradas. Rango de medición de hasta 10 mm/32.8 pies. Alta seguridad, no dañará la superficie de la pieza de trabajo. Cuando la sonda toca la pieza de trabajo, una luz roja y un sonido de pitido.
Instrucciones
Aviso:
1. Para garantizar la precisión de la medición, no toques la sonda directamente con la mano.
2. Si no se utiliza durante mucho tiempo, retira la batería para prolongar la vida útil de la batería.
3. Si resulta que la energía de la batería es insuficiente, reemplaza la batería del mismo modelo.
Steve
Reseñado en el Reino Unido el 8 de marzo de 2025
Accurate device
Dino
Reseñado en el Reino Unido el 12 de julio de 2024
The way it works isn’t optical as is says on the box its delivered in but continuity . Light didn’t work and sounder would now and then so it was as accurate as a sneeze .Would not recommend.
sambartle
Reseñado en el Reino Unido el 27 de abril de 2024
I wouldn't trust this in industrial use, especially as it doesnt have any kind of automatic feedback to the device to stop it once it probes the material.For me on my small CNC mill this works just fine for zeroing material using manual jog, as long as theres a conductive path from the spindle to the workpiece, as I just bump the ball into the workpiece as slowly as possible, and it conducts via the strap on the piece to the spindle assembly and thus the body of this probe.I then just manually zero the controller.In industrial use, I'm not sure this would work, as it needs to be able to feedback to the machine which this cant, unless some mills can hear the beep perhaps?The battery is listed as "Rechangeable" which I assumed meant rechargeable, however it definitly isn't and in fact theres no battery supplied. It needs either 2x 1.5V UM5 20L 32L or a 12V UM5 32/20LB 20S according to the instructions.. I have no idea what those are but 2x 1.5V N batteries seemed to work just fine for me.Accuracy wise, its fine for me, but I have no way of proving if it would be accurate enough for real work unfortunately, Im not sure Id trust it.
Productos recomendados